Devon GTX, 2010

Devon GTX, 2010


Constructed of aircraft-quality carbon fiber from stem to stern, the Devon GTX instantly communicates its ultra-performance capability through aggressive, compact proportions and large (up to 20-inch) lattice-structure center-lock wheels. In all, the exterior design navigates between the past and science fiction, subtly blending muscle, curves, exquisite shapes and dynamic graphics to create a classical, yet futuristic, statement that's ready to stand the test of time.

The Exterior
While overall shape of the new Devon GTX carries traditional "muscle car" dimensions with a long dash-to-axle and short front and rear offsets, it's executed in the context of sophistication and athletic grace. Seemingly honed from a single billet, the Devon GTX's flowing exterior skin is formed of carbon fiber, which enables precise molding - rather than traditional stamping - of exterior fenders, panels, and closures. Large (18 / 19-inch or 19 / 20-inch combinations) 12-spoke aluminum forged monoblock lattice structured wheels lead the eye to large, ultra-performance calipers (carrying the Devon insignia) and rotors, leaving no doubt about the supercars's performance competency.

The wheels carry a machined or polished finish and painted inner-spoke surfacing leading to the Devon insignia defining the center hub. The Devon GTX is also equipped with center-mounted locking hubs, a lug-free design more commonly seen on race cars.

The front "face" of the vehicle is absent of a traditional grille, resulting in a clean, aero-sloped front section defined by a center-positioned billet that runs uninterrupted to the center of the hood. Ample air for combustion and brake cooling is achieved through large intakes positioned in the lower forward corners. The intakes carry large chrome trapezoid-shaped inlets (approximately 3-inches wide) that lead to channeling for optimal combustion air intake and engine cooling.

Three-inch wide trapezoidal chrome dual exhaust tips match the intake inlets in the front, are side-by-side positioned, and pass through the center portion of the rear fascia, further communicating the ultra-performance capability of the new Devon offering.


The Interior
The interior of the new Devon GTX has been designed with the driving enthusiast top of mind - all features, surfaces and dimensions have been created to ensure a second-to-none performance experience. A smaller diameter, thick-rimmed, leather-wrapped steering wheel ensures a performance grip and optimal feel. Carbon-fiber reinforced structured seats - carrying a racing shell design and integrated headrests - incorporate six-point racing harness seat belts (optional; five point standard) - are chrome trimmed, outfitted with stiff performance durometer seat and bolsters, and skinned with the softest real-leather hide available.

Dual-grain leather surfacing ensures a dynamically tactile environment. Seat and center console areas carry softer leather with smoother animal grain; the upper IP, pillars, headliner and door surfaces incorporate a coarser, three-dimensional tactility. All audio, HVAC, and cluster instrumentation is communicated via digital analog graphics on high-definition displays. All instrumentation incorporates bluish fluorescent illumination. The speedometer, tachometer, fuel, temperature and other mechanical related instrumentation is displayed in the cluster under a fixed hood. Audio and HVAC is displayed in the integrated centerstack.
Suspension
The independent front and rear suspensions on the 2010 Devon GTX carry aluminum components for optimized un-sprung mass, ensuring agile handling and optimal tuning for boulevard and track performance.

The Brakes
The brake system on the new Devon GTX is engineered to deliver world-class performance, appearance and durability without compromise. The technology has proven itself by winning professional sports car races and championships, yet also provides benefits that can be experienced and appreciated every day. The brake system is designed to provide shorter stopping distances, better brake modulation, firmer pedal feel and less brake fade than other high-performance luxury cars, resulting in powerful, confidence-inspiring performance.

With six pistons in each front caliper and four in each rear, the brake system is custom-tailored to the uncompromising requirements of the Devon GTX. The opposed-piston brake calipers are first forged, then weight-optimized by fully machining all exterior surfaces. The two-piece rotor design reduces weight by one-third compared to a one-piece brake rotor of the same dimensions. The patented, directional AeroRotor vane design induces up to 80-percent more cooling airflow than the rotors used as original equipment on many high-performance luxury vehicles. This reduces maximum and average operating temperatures, improving pad and rotor life.
The brake pad material was specially selected to combine the good manners required of a true high-end luxury offering in daily driving with high performance driving. The standard brake pads provide low noise levels and much less dust than typical of many high-performance luxury vehicles. At the same time, they have the high temperature capability to withstand race track lapping with low susceptibility to accelerated wear or judder that may afflict other cars.
Steering
Steering feedback to the driver is performance tuned through a premium rack and pinion steering gear. The steering system incorporates outstanding torsional stiffness with less operating friction. The result is steering precision of the highest order, with near-perfect linear response and smooth, predictable transitions.

Wheels and Tires
For sure-footed, enhanced handling, the Devon GTX is equipped with purpose designed and built Devon Motorworks forged aluminum alloy wheels with center lock configuration. Wheel sizes are 18- by 10-inches in the front; 19- by 13-inches in the rear. Larger wheels are optional and measure 19- by 10-inches in front; 20- by 13-inches in the rear. The lattice structure wheels incorporate a geometric design which not only enable views to the large brakes (static or in motion), but enable weight optimization - a key to reducing un-sprung mass.

Powertrain
The all-new 2010 Devon GTX blends athletic strength with uncompromising refinement thanks to what is perhaps the most powerful naturally aspirated production car powertrain system in the industry. The Devon GTX is equipped with an 8.4-liter (510 cubic inches) V-10 engine that produces 650 horsepower (484.7 kW) at 6100 rpm. The V-10 engine is mated with a track-proven six-speed manual transmission.The end result is a propulsion system that rivals - and in most cases surpasses - the most powerful offerings in the world.

6 Speed Manual Transmission
The transmission on the Devon GTX incorporates a host of applications to ensure effective transfer of the 8.4-liter engine's exceptional power and torque while delivering high-performance, fun-to-drive shifting characteristics. The end result: is short, crisp shift throws; smooth gear synchronization, and overall improved shift feel with little or no vibration. The transmission boasts wider gears for increased torque-handling capability; a six-gear synchronizer system for exceptional shift feel and reduced efforts; double-cone reverse gear synchronizer for eased "R" selection; strengthened housing for minimal "flex" and improved shifting; and a dual mass flywheel with twin-disc clutch.

0 comments:

Post a Comment